Material Interface Engineering Laboratory

Japanese

CV

Satoshi Motozuka
Department of Materials Science and Engineering
Kyushu Institute of Technology
1-1 sensuicho, Tobata, Kitakyushu, Fukuoka 804-8550, Japan
motozuka[at]post.matsc.kyutech.ac.jp
(replace [at] to @.)

EDUCATION

  • Ph. D.
    Tokyo Institute of Technology, Japan, 2013
    Department of Inorganic materials
    Thesis Title: “Study on Conjugation of Carbon-Metal and Carbon-organic Hetero Interfaces Using Mechanochemical reaction”
    Supervisor: Junzo Tanaka
  • M. E. (Master of Engineering)
    Tohoku University, Japan, 2006
    Department of Mechanical System Engineering
    Thesis Title: “Development on Scanning Near-Field Thermal Radiation Microscope”
    Supervisor: Hiroo Yugami
  • B. E. (Bachelor of Engineering)
    Toyohashi University of Technology, Japan, 2004
    Department of Engineering
    Thesis Title: “Mechanochemical Reaction Between Waste Cement and Carbon Dioxide”
    Supervisor: Seiji Yokoyama

EMPLOYMENT HISTORY

  • 2019
    Kyushu Institute of Technology, Fukuoka, Japan,
    Associate Professor
  • 2010-2019
    Gifu National College of Technology, Gifu, Japan,
    Promote to Associate Professor – 2015
    Promote to Lecturer – 2014
    Assistant Professor – 2010
  • 2006-2010
    NGK Insulators, Ltd.
    Machine Designer

AWARDS

  • 2018
    Distinguished Teacher, National Institute of Technology
  • 2017
    Prize of Outstanding Technical Paper, Institute of Electrical Engineers of Japan
  • 2013
    Encouraging Prize, Society for Discreate Variational X alpha method
  • 2012
    Poster Award, The Ceramic Society of Japan

PROFESSIONAL ORGANIZATIONS

  • The Japan Institute of Metals and Materials
  • The Iron and Steel Institute of Japan
  • Japan Society of Powder and Powder metallurgy
  • The Institute of Electrical Engineers of Japan
  • Society for Discrete Variational X alpha method

PROFESSIONAL ACTIVITES

  • Society for Discrete Variational X alpha method, Board Member

RESEARCH FUNDING

  • *indicates current funding, 1 €=118 yen
  • *Japan Society for the Promotion of Science, 2019, (4 years)
    (As a Principal Investigator, Co-Investigator: Hisashi Sato)
    € 87,288
    Title: Study on 4th driving force of crystal growth following strain, boundary and surface energy.
  • *Japan Society for the Promotion of Science, 2019, (3 years)
    (As a Co-Investigator, Principal Investigator: Hisashi Sato)
    € 22,880
    Title: Study on Mechanism of Surface Structure induced by shot peening process.
  • *New Energy and Industrial Technology Development Organization, 2018, (2 years)
    (As a Co-Investigator, Principal Investigator: Private company, another co-Investigator: Hisashi Sato)
    € 190,677
    Title: Nano-crystalline Iron Alloy based High Performance Soft magnetic material.
  • New Energy and Industrial Technology Development Organization, 2017, (1 year)
    (As a Principal Investigator, Co-Investigators: Hisashi Sato and Yun Kyyoul)
    € 127,118
    Title: Soft Magnetic Materials having both High Saturation Flux Density and Low Loss Characteristics.
  • Japan Society for the Promotion of Science, 2017, (3 years)
    (As a Principal Investigator)
    € 36,355
    Title: Lubrication Mechanism of graphite unique to mechanochemically induced interface.
  • Amada Foundation, 2016, (2 years)
    (As a Principal Investigator)
    € 14,406
    Title: Deformation induced texture in iron powder.
  • Izumi Foundation, 2016, (1year)
    (As a Principal Investigator)
    € 8,474
    Title: Soft Magnetic iron core using powder with texture.
  • New Energy and Industrial Technology Development Organization, 2016, (1 year)
    (As a Principal Investigator, Co-Investigator: Shunji Yanase)
    € 101,694
    Title: Platelet Iron Powder with (100)[0vw] texture.
  • Japan Society for the Promotion of Science, 2015, (2 years)
    (As a Principal Investigator)
    € 31,949
    Title: Fricition Induced Mechanochemical Reaction.
  • Koshiyama Foundation, 2012, (1 year)
    (As a Principal Investigator)
    € 11,016
    Title: Mechanochemically induced Interfacial Bonding between Carbon fiber and Thermoplastics.
  • Japan Science and Technology Agency, 2012, (1 year)
    (As a Principal Investigator)
    € 14,406
    Title: Process for Carbon Fiber reinforced thermoplastics.

INVITED LECTURES

  1. Mechanochemical reaction inducing random cube texture on soft magnetic powders, 54th technical forum (organized by The Society of Powder Technology), Nagoya, Japan, September 2019.
  2. High performance soft magnetic iron powder processed by severe deformation using ball mill, 39th technical forum (Organized by Chubu bureau of Economy, trade and Industry and Nagoya Institute of Technology Research Cooperation Association), Nagoya, Japan, March 2018.
  3. Industry-academia-government collaboration through project of New Energy and Industrial Technology Development Organization, Joint forum 2017 (Organized by Fukui National College of Technology), Fukui, Japan, December 2017.
  4. Process for platelet iron powder with random cube texture, 92th regular technical meeting (Organized by The Japan Association of Bonded Magnetic Materials), Tokyo, Japan, September 2017.
  5. Alloy Design Using Discrete Variational X Alpha Molecular Orbital calculation, 53rd Character control conference (Organized by Tyugoku Shikoku Branch of the Japan Institute of Metals and Materials), Hiroshima, July 2015.

RESEARCH PUBLICATIONS

Refereed Journal Publications

  1. Satoshi Motozuka, Syuma Iwai, Hisashi Sato, Hirofumi Hojo, Yasuo Okazaki, Masahiko Morinaga, “Formation of (001) fiber texture in iron powder and its effect on magnetic properties and crystal orientation of the powder compact”, ISIJ international 59(1), 192−200, (2018).
  2. Takehiko Matsuya, Sarita Morakul, Yuichi Otsuka, Kiyoshi Ohnuma, Motohiro Tagaya, Satoshi Motozuka, Yukio Miyashita, Yoshiharu Mutoh, “Visible Light-induced antibacterial effects of the luminescent complex of hydroxyapatite and 8-hydroxyquinoline with gray titania coating”, Applied Surface Science 448, 529−538, (2018).
  3. Meiqi Yu, Kazuhiro Matsugi, Zhefeng Xu, Yongbum Choi, Jinku Yu, Satoshi Motozuka, Yoshiyuki Nishimura, Ken-ichiro Suetsugu, "High temperature characterization of binary and ternary Bi alloys microalloyed with Cu and Ag”, Materials Transactions, 59, 303−310, (2018).
  4. Satoshi Motozuka, Tomoya Ikeda, Tomoya Miyagawa, Hisashi Sato, Masahiko Morinaga, “Formation process of the {001} fiber texture on iron particles using simple ball milling”, Powder technology 321, 9−12, (2017).
  5. Motohiro Tagaya, Satoshi Motozuka, “An investigation into photofunctional interfaces of 8-hydroxyquinoline/hydroxyapatite hybrids”, Optical Materials.” Opt. Mater. 66, 392−398, (2017).
  6. Motohiro Tagaya, Shigeaki Abe, Satoshi Motozuka, Kota Shiba, Taro Takemura, Ikuo Hayashi, Yoshimitsu Sakaguchi, “Surface-engineered mesoporous silica particles with luminescent, cytocompatible and targeting properties for cancer cell imaging” RSC Advances, 7 (22), 13643 −13652 (2017).
  7. Satoshi Motozuka, Motohiro Tagaya, Kotaro Hayashi, Takehiro Kameyama, Hisakazu Oguri, Zhefeng Xu, “Mechanochemical surface modification of carbon fibers using a simple rubbing method” Jounal of Composite Materials, 51(25), 3577−3584 (2017).
  8. Meiqi Yu, Zhefeng Xu, Yongbum Choi, Takuma Konishi, Kazuhiro Matsugi, Jinku Yu, Satoshi Motozuka, Ken-ichiro Suetsugu, "Tensile properties of Bi alloys and a case study for alloy design in their application to high temperature solders”, Materials Transactions, 58, 140−147, (2017).
  9. Zhefeng Xu, Yond Bum Choi, Takuya Niimi, Meiqi Yu, Satoshi Motozuka, Kazuhiro Matsugi, Ken-ichiro Suetsugu, “Application and Compositional Optimization of Zn Alloys for High Temperature Solders” Material Transactions, 57(4), 553−557, (2016).
  10. Kota Shiba, Satoshi Motozuka, Tadashi Yamaguchi, Nobuhiro Ogawa, Yuichi Otsuka, Kiyoshi Ohnuma, Takuya Kataoka, Motohiro Tagaya, “Effect of Cationic Surfactant Micelles on Hydroxyapatite Nanocrystal Formation: An Investigation into the Inorganic-Organic Interfacial Interactions” Crystal Growth and Design, 16, 1467−1471 (2016).
  11. Takehiko Matsuya, Yuichi Otsuka, Motohiro Tagaya, Satoshi Motozuka, Kiyoshi Ohnuma, Yoshiharu Mutoh, “Formation of Stacked Luminescent Complex of 8-hydroxyquinoline Molecules on Hydroxyapatite Coating by Using Cold Isostatic Pressing.” Materials Science and Engineering: C, 58, 127−132 (2015).
  12. Satoshi Motozuka, Motohiro Tagaya, Kotaro Hayashi, Masahiko Morinaga, “Texture Formation in Iron Particles Using Mechanochemical Milling with Graphite as a Milling Aid.” AIP advances, 5, 097127 (2015).
  13. Satoshi Motozuka, Motohiro Tagaya, Kota Shiba, Zhefeng Xu, Masami Nishikawa, Tomohiko Yoshioka, Toshiyuki Ikoma, Junzo Tanaka, “Effective Composite Preparation between Graphite and Iron Particles by the Interfacial Mediation of Force-Activated Oxygen Atoms.” Industrial and Engineering Chemistry Research, 53(43), 16736−16753 (2014).
  14. Satoshi Motozuka, Motohiro Tagaya, Nobuhiro Ogawa, Kazuki Fukui, Masami Nishikawa, Kota Shiba, Toshiyuki Uehara, Takaomi Kobayashi, “Effective Preparation of Graphite Nanoparticles Using Mechanochemical Solid-State Reactions.” Solid State Communications, 190, 28−32 (2014).
  15. Kota Shiba, Motohiro Tagaya, Sadaki Samitsu, Satoshi Motozuka, “Effective Surface Functionalization of Carbon Fibers for Fiber/Polymer Composites with Tailor-made Interfaces.” Chem Plus Chem, 79, 197−210 (2014).
  16. Satoshi Motozuka, Motohiro Tagaya, Tomohiko Yoshioka, Masami Nishikawa, Toshiyuki Ikoma, Masahiko Morinaga, Junzo Tanaka, “Efficient Methane Conversion to Hydrogen by the Force-Activated Oxides on Iron Particle Surfaces” Journal of Physical Chemistry C., 117, 16104−16118 (2013).
  17. Satoshi Motozuka, Motohiro Tagaya, Toshiyuki Ikoma, Hiroshi Nishiyama, Masami Nishikawa, Sadaki Samitsu, Tomohiko Yoshioka, Junzo Tanaka, “Effective Functionalization of Disordered Oxide Lattices on Iron Particle Surfaces Using Mechanochemical Reactions.” Journal of Physical Chemistry C., 117, 9908−9919 (2013).
  18. Satoshi Motozuka, Motohiro Tagaya, Yuji Hotta, Masahiko Morinaga, Toshiyuki Ikoma, Tsuyoshi Honma, Toshiyuki Daimon, Junzo Tanaka, “Mechanochemical Fabrication of Carbon Fiber/Nylon-6 Composites with Interfacial Bondings.” Industrial & Engineering Chemistry Research, 52(5), 2182−2189 (2013).
  19. Satoshi Motozuka. Motohiro Tagaya, Masahiko Morinaga, Toshiyuki Ikoma, Tomohiko Yoshioka, Junzo Tanaka, “Methane Adsorption and Dissociation on Mechanochemically-activated Iron Surfaces.” International journal of Powder Metallurgy, 48(6), 21−29 (2012).
  20. Satoshi Motozuka, Motohiro Tagaya, Toshiyuki Ikoma, Tomohiko Yoshioka, Zhefeng Xu, Masahiko Morinaga, Junzo Tanaka, “Mechanochemical Fabrication of Iron-graphite Composites.” Journal of Composite Materials, 47, 10, 1241−1246 (2012).
  21. Satoshi Motozuka, Motohiro Tagaya, Toshiyuki Ikoma, Tomohiko Yoshioka, Zhefeng Xu, Junzo Tanaka, “Preparation of Copper-graphite Composite Particles by Milling Process.” Journal of Composite Materials, 46, 22, 2829−2834 (2012).
  22. Motohiro Tagaya, Satoshi Motozuka, Toshiyuki Ikoma, Junzo Tanaka, “Mechanochemical Preparation of 8−Hydroxyquinoline/Hydroxyapatite Hybrid Nanocrystals and Their Photofunctional Interface.” Insdustrial & Engineering Chemistry Research, 51, 11294−11300 (2012).
  23. Motohiro Tagaya, Satoshi Motozuka, Toshiyuki Ikoma, Junzo Tanaka, J. “Efficient Incorporation of Monomeric Anthracene into Nanoporous Silica/Surfactant Nanocomposite Spheres Using a Mechanochemical Solid State Reaction.” Journal of Materials Chemistry, 22, 18741−18743 (2012).
  24. Motohiro Tagaya, Toshiyuki Ikoma, Tomohiko Yoshioka, Satoshi Motozuka, Zhefeng Xu, Minami, F,; Junzo Tanaka, “Synthesis and Luminescence Properties of Eu(III)-doped Nanoporous Silica Spheres.” Journal of Colloid and Interface Science, 363, 456−464 (2011).
  25. Motohiro Tagaya, Toshiyuki Ikoma, Tomohiko Yoshioka, Satoshi Motozuka, Fujio Minami, Junzo Tanaka,  “Efficient Synthesis of Eu(III)-Containing Nanoporous Silicas.” Materials Letters, 65, 2287–2290 (2011).
  26. Nik Hisyamudin Muhd Nor, Seiji Yokoyama, Tatsuya Suzuki, Satoshi Motozuka, Tetsuya Shimomura, Junji Sasano, Masanobu Izaki, “Reaction Between Carbon Dioxide and Mechanically Activated Metal Powder.” Advanced Materials Research, 129, 799−803 (2010).
PAGE TOP